Altronix ACM8CB Installation Instructions Manual de usuario descargar pdf (Pagina 5)

ACM8/CB Sub-Assembly - 5 -

LED Diagnostics:

ACM8 & ACM8CB Access Power Controller

LED ON OFF

LED 1- LED 8 (Red) Output relay(s) energized. Output relay(s) de-energized.

Trg(Green) FACP input triggered (alarm condition). FACP normal (non-alarm condition).

Terminal Identification Tables:

ACM8 & ACM8CB Access Power Controller

Terminal Legend Function/Description

-- Power + 12VDCor24VDCinputfrompowersupplyboard.

-- Control +

These terminals can be connected to a separate, UL Listed power supply to

provide isolated operating power for the ACM8/ACM8CB

(jumpersJ1andJ2mustberemoved).

TRIGGER

INPUT 1 - INPUT 8

IN,GND

From normally open and/or open collector sink trigger inputs

(request to exit buttons, exit pir’s, etc.).

OUTPUT 1-OUTPUT 8

NC, C, NO, COM

12to24voltsAC/DCtriggercontrolledoutputs:

Fail-Safe [NC positive (+) & COM Negative (-)],

Fail-Secure [NO positive (+) & COM Negative (-)],

Auxiliary output [C positive (+) & COM Negative (-)]

(WhenusingACpowersuppliespolarityneednotbeobserved),

NC,C,NObecomeform“C”5amp24VAC/VDCrateddryoutputswhenfusesare

removed (ACM8). Contacts shown in a non-triggered state.

FACP INTERFACE

T, + INPUT -

Fire Alarm Interface trigger input from FACP. Trigger inputs can be normally open,

normally closed from an FACP output circuit (Fig. 3 through 7, pg. 6).

FACP INTERFACE

NC, C, NO

Form“C”relaycontactrated@1amp28VDCforalarmreporting.

(This output has not been evaluated by UL).

1 2 3 4 5 6 7 8

Sin comentarios

Altronix ACM8CB Installation Instructions Manual de usuario Pagina 5