Altronix NetWay16M Guía de instalación descargar pdf (Pagina 11)

NetWay8M/ NetWay16M - 11 -

Wall Mount Installation

1-Installmountingbrackets(A)ontheleftandrightsideofrackchassis using

 four(4)flatheadscrews(B)(included)(Fig. 9a).

2- Place unit at desired location and secure with mounting screws

(not included) (Fig. 9b).

Caution: It is necessary to

 makesuremountingscrews

are securely fastened to a

beam when installing the

unit vertically.

Mounting Options:

Fig. 8

Rack Mount Installation

1- Removeanddiscardfactoryinstalledscrewsfrombothsidesofrackchassis(Fig. 8a).

2-Installmountingbrackets(A)ontheleftandrightsideofrackchassis using the

 four(4)flatheadscrews(B)(included)(Fig. 8b).

3- PlaceunitintodesiredEIA19”rackpositionandsecurewithmountingscrews(not included) (Fig. 8c).

Fig. 10

Fig. 9

Shelf Installation

1- Position and affix rubber pads (C) (included) at each

corner on the bottom of the unit (Fig. 10).

2- Place unit in desired location.

Mounting Hardware (Included):

Fig. 9b

Fig. 9a

Fig. 8b

Fig. 8a

Fig. 8c

Top Top Top

Front

Left

Front

Left

FrontLeft

LeftSide

RubberPad

Two(2)mountingbrackets

Six(6)flatheadscrews

formountingbrackets.

Four(4)rubberpads.

Remove

Dotted lines indicate studs

behind sheetrock.

1 2 ... 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios

Altronix NetWay16M Guía de instalación Pagina 11

Comentarios a estos manuales