Altronix NetWay8M Guía de instalación descargar pdf (Pagina 4)

- 4 - NetWay8M/NetWay16M

Installing a NetWay1512 adapter for 12VDC IP cameras up to 13W:

1. Mount NetWay1512 in proximity to IP camera (Fig. 2, pg. 4). Affix one side of velcro (supplied) to NetWay1512

and the place the second side of the velcro in the desired location.

2. Connect structured cable from port marked [IN] on Fig. 2 - NetWay1512

NetWay1512 to any ports marked [OUT] of NetWay8M/

NetWay16M (Fig. 2, pg. 4, Fig. 1a, pg. 3).

3. Connect structured cable from port marked [OUT] on

NetWay1512 to the IP camera (Fig. 2, pg. 4).

4. Connect12VDCoutputfromNetWay1512terminals

 marked[---12VDC+]tothepowerinputofthe

IP camera (Fig. 2, pg. 4). Polarity must be observed.

5. Power LED indicator will illuminate on NetWay1512

under normal conditions (Fig. 2, pg. 4).

Installing a NetWay3012 adapter for 12VDC IP PTZ up to 25W:

1. Mount NetWay3012 in proximity to IP camera utilizing mounting Fig. 3 - NetWay3012

hole (Fig. 3, pg. 5). Use a proper fastener and/or wall anchor

when securing NetWay3012 to the wall.

2. Connect structured cable from port marked [IN] on NetWay3012

to ports marked [OUT] of NetWay8M/NetWay16M

(Fig. 3, pg. 4, Fig. 1a, pg. 3).

3. Connect structured cable from port marked [OUT] on

NetWay3012 to the IP fixed or PTZ camera (Fig. 3, pg. 4).

4. Connect12VDCoutputfromNetWay3012terminalsmarked

 [+12VDC---]tothepowerinputofthe

IP camera (Fig. 3, pg. 4). Polarity must be observed.

5. Power LED indicator will illuminate on NetWay3012 under

normal conditions (Fig. 3, pg. 4).

Installing a NetWayXT/NetWayXTX repeater module:

NetWayXT will work only with PoE devices. Fig. 4 - NetWayXT/NetWayXTX

NetWayXTXwillworkwithPoE/PoE+devices.

1. Mount NetWayXT/NetWayXTX in desired location utilizing

the mounting hole (Fig. 4, pg. 4). Use a proper fastener and/or

wall anchor when securing NetWayXT/NetWayXTX to the wall.

2. Connect structured cable from port marked [OUT] on NetWay

to port marked [IN] on the NetWayXT/NetWayXTX

(Fig. 4, pg. 4, Fig. 1a, pg. 3).

3. Connect structured cable from port marked [OUT] on

 NetWayXT/NetWayXTXtothePoE/PoE+camera/edgedevice

or next NetWayXT/NetWayXTX repeater (Fig. 4, pg. 4).

4. Port status LEDs will illuminate on NetWayXT/NetWayXTX

indicating the port is operational (refer to LED Definitions).

5. PowerLEDwillilluminateindicating12VDCoutput.

Port LED definitions for NetWayXT repeater:

Status Green LED Yellow LED

OFF Indicates it is connected as 10Base-T or no link. Indicates no link.

ON Indicates it is connected as 100Base-TX. Indicates a link.

Blinking --------------------------- Indicates activity.

Port LED definitions for NetWayXTX repeater:

Status PoE/PoE+ Output LED PoE/PoE+ Input LED Yellow LED

OFF NoPoE/PoE+Output NoPoE/PoE+Input Indicates no link.

ON NormalPoE/PoE+Output PoE/PoE+Input Indicates a link.

Blinking ------- ------- Indicates activity.

NetwayXT

Repeater

www.altronix.com

OUT

Power

LED

Structured

Cable from

NetWay8/16

Structured

Cable from

NetWay8/16

Structured Cable

to IP Camera/

Edge Device

or next

NetWayXT

PoE/PoE+

Output

LED

Structured

Cable to

PoE/PoE+

Camera/Device or

next NetWayXTX

Port Status

LEDs

PoE/PoE+

Input

LED

NetWayXT

NetWayXTX

www.altronix.com

OUT

Netway1512

Adapter

12VDC

--- Output +

-- +

12VDC

Output

Structured

Cable from

NetWay

Structured Cable

from IP Camera/Device

Power

LED

www.altronix.com

OUT

Netway3012

Adapter

12VDC

+ Output ---

Power LED

12VDC

Power to

Camera

Structured Cable

from IP Camera

I.T.E. 43KC

Structured Cable

from NetWay8,

NetWay8M, NetWay16

or NetWay16M

1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios

Altronix NetWay8M Guía de instalación Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Servidores Altronix NetWay8M