Altronix NetWay8M Guía de instalación descargar pdf (Pagina 6)

- 6 - NetWay8M/NetWay16M

NetWay8M/NetWay16M User Interface and Programming:

Note: A constant PC connection is not required for proper operations and is used as a local programming/monitoring tool only.

Step 1. Set Local Area Connection of your laptop to Static IP mode.

Static IP address of the laptop must be assigned to the same network as the current IP address of NetWay8M/

NetWay16M. The default IP address of NetWayM units is 192.168.168.168. This manual assumes that it has not

been changed by user.

For Windows XP:

a. Open Network Connections by clicking Start button, then clicking Settings, then clicking Network Connections.

b. Right click the Local Area Connection. Click Properties. Administrator permission required

If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

c. Double click Internet Protocol (TCP/IP) menu item.

d. Choose the Use the following IP address option.

e. Set the IP address to 192.168.168.15 (or another valid IP address on the same network).

f. Click OK. Close all windows.

For Windows 7:

a. Open Network Connections by clicking the Start button, clicking Control Panel, clicking Network and Internet,

clicking Network and Sharing Center, and then clicking Change Adapter Settings.

b. Right click the Local Area Connection icon, and then click Properties. Administrator permission required.

If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

c. Click the Networking tab. Under this connection uses the following items, click either Internet Protocol Version 4

(TCP/IPv4) and then click Properties.

d. Choose the Use the following IP address option.

e. Set the IP address to 192.168.168.15 (or another valid IP address on the same network).

f. Click OK. Close all windows.

Step 2. Connect a laptop or PC to the Ethernet port of your NetWayM unit.

The NetWayM unit should be powered up at this moment.

Step 3. Open a browser window (it is necessary to update your browser software to the latest version so that the pages

display and function correctly).

Step 4. Enter the NetWayM IP address (the default IP address is 192.168.168.168) into the address bar.

Status page will be displayed.

Step 5. Click Setup link. Setup page will be displayed. You may now program your NetWayM.

All NetWayM units come factory set:

a. Ports - Enabled.

b. Ports - PoE shutdown Disabled.

c. Power Allocation Mode - Class restricted.

Port Priority:

NetWayM allows you to prioritize ports so that power will be allocated to the port with the highest priority first and the

lowest priority last. This will ensure that ports with the higher priority will continue to operate in the event the

NetWayM is overloaded. Priority is designated 1 through 8, with 1 as the highest and 8 as the lowest.

NetWay8M - Port priority is factory set at 1 through 8 for ports 1 through 8.

NetWay16M - Port priority is factory set at 1 through 8 for ports 1 through 8 and 1 through 8 for ports 9 through 16.

1. To reassign port priority select desired number from the drop down box for that corresponding port.

It is necessary to assign the port with the highest priority first and continue in ascending order.

2. Click Submit to save the changes or proceed with programming.

Note: Access Control Ports must have highest priority.

Port Identification:

NetWayM allows you to identify each port (ID up to 8 characters).

1. Type the desired ID into the text box for each corresponding port.

2. Click Submit to save the changes or proceed with programming.

1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios

Altronix NetWay8M Guía de instalación Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Servidores Altronix NetWay8M