Altronix NetWay8M Guía de instalación descargar pdf (Pagina 8)

- 8 - NetWay8M/NetWay16M

Configuring NetWay8M/NetWay16M for network connection:

Since every Network Configuration is different, please check with your Network Administrator to see if your NetWay8M/

NetWay16MshouldusestaticIPaddresses,orDHCPassignedIPaddressesand/anInboundPortassignmentpriortoset-

ting up network connection.

1. Click Network Settings link.

If you are prompted for an administrative password, type and submit the password.

Note: Default settings have password requirements turned off .

2. Network Setup page will be displayed. You may now configure your NetWay8M/NetWay16M for network

connection.

Figure 6 is a screenshot of the NETWORK SETTING MENU. This menu is for configuring the NetWay8M/NetWay16M

units for a network connection.

Network Type:

Static IP: User can set a fixed IP for network connection.

DHCP:DHCPserverinLANwillautomaticallyanassignIPconfigurationforthenetworkconnection

IP:ThisfieldshowstheNetWay8M/NetWay16McurrentIPAddress.AstaticIPaddressmustbesetmanually.IfDHCP

this value will be assigned automatically.

Subnet Mask: This field shows the subnet mask for your network so the NetWay8M/NetWay16M will be recognized

withinthenetwork.IfDHCPisselected,thisvaluewillbeassignedautomatically.

InboundPort:PortnumberforHTTP/WEBcommunication.

HostName:NameoftheNetWay8M/NetWay16MdeviceontheLAN

Additional information:

1.IfusingDHCP,allsettingswillbedetectedautomatically.

WhileDHCPisausefultoolfordeterminingthenetworksettings,ifyousetupyourNetWay8M/NetWay16Minthis

manner its IP address may change at different times for different reasons, particularly after a power failure. If the IP

address of the NetWay8M/NetWay16M changes, you may have difficulties accessing your NetWay8M/NetWay16M lo-

cally and/or remotely.

ItisstronglyrecommendedthatyouconnectviahostnamewhenunitsconfiguredasDHCP.

PleasedonotsettheDHCPaddressissuedtotheNetWay8M/NetWay16MbytherouterasitsstaticIPaddressunlessyou

take specific steps that program your router to prevent such address conflicts.

2. If using a Static IP (recommended), you will need to input the information manually. In order for DDNS to work, you

must enter valid data, compatible with your network, for all of the network setting fields: IP address, Subnet Mask, In-

boundPortandHostName.

3. If you are connecting through a router, make sure that you have ‘opened up’ all the required network ports in the port

forwarding section of your router’s setup options. That is, you have directed the router to send any incoming traffic using

those IP ports to the LAN IP address of the NetWay8M/NetWay16M. Useful information about router port forward-

ing can be found at www.portforward.com . Different routers may use different terms for port forwarding function. For

instance, D-Link calls it virtual server, Netopia calls it pinholes.

The default port for NetWay8M/NetWay16M is: 80

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Altronix NetWay8M Guía de instalación Pagina 8